Sale and Manufacture of Refractory Products
es | en

Consumibles

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. TIPOS FILTROS MALLA TEJIDA REFRACTARIA

    TIPOS FILTROS MALLA TEJIDA REFRACTARIA

    This type of Filters is placed at the exit of the Casting furnace; for removing oxides and large paticles. They are used mostly in CAST ALUMINIUM. Refractory Woven Mesh Filters are also used in STEEL CASTING. Learn More
  2. CARBON RODS 13x430 mm

    CARBON RODS 13x430 mm

    Applications:

    Suitable for cuting Pouring cup,burr steel.

    Thecnical specifications:

    Diámeter: 12,7-13,2 mm

    Length: 425-432 mm.

    Resistance: <23μΩm

    Contenido cenizas:<1,5%

    Voltaje: 700-800

    Resistencia a ruptura:>17MPa

    Contenido agua: <0,5%

    Learn More
  3. THERMOCOUPLES TYPES STEEL

    THERMOCOUPLES TYPES STEEL

    Inmersion Thermocouples, used to obtein measurements of temperature in molten metal, they are essentials in the production process of Iron, steel and other metals, ferrous and non-ferrous.

    A meticulous technique of production with an strict quality control in the manufacture of each thermocouple, ensures accuracy in temperature taking.

    INSIDE CERAMIC.

    DESCRIPTION:

     Termocouple  Pt-Pt-10% Rh inserted in refractory cement highly isolated according with   BSEN60584-1 (ITS 90)

    Sensor protectiion: steel cap.

    Dimensional tolerances of capboard tube: Diam. interior: 17,8 +- 0.3 mm Diam. Exterior: 28,0 +- 1,0 mm

    Learn More
  4. NOZZLES  2A diámeter 60

    NOZZLES 2A diámeter 60

    Description:

    - Refractory shaped piece

    - Nozzles are made from high purity rto promote higher erosion resistance to metals and alloys. 

    Application:

    - Used in bottom pour ladle applications.

    - Flow control.

    Learn More
  5. FOAM FILTER  ZrO2  TYPE  STEEL

    FOAM FILTER ZrO2 TYPE STEEL

    Characteristics:

    The basic raw material (ZrO2) .

    Temperature 1700ªC.

    Applications:

    Suitable for STEEL; Steel to carbon and their Alloys. Stainless & Super Alloys.

    Learn More
  6. NOZZLES  O A diámeter 40

    NOZZLES O A diámeter 40

    Description:

    - Refractory shaped piece

    - Nozzles are made from high purity rto promote higher erosion resistance to metals and alloys. 

    Application:

    - Used in bottom pour ladle applications.

    - Flow control.

    Learn More
  7. NOZZLES  O A diámeter 50

    NOZZLES O A diámeter 50

    Description:

    - Refractory shaped piece

    - Nozzles are made from high purity rto promote higher erosion resistance to metals and alloys. 

    Application:

    - Used in bottom pour ladle applications.

    - Flow control.

    Learn More
  8. SAFETY PACK

    SAFETY PACK

    Description: 1 unit Safesuit + 1 unit FF3 Mask Aplication: Protection against hazardous substances Ready to be used. Learn More
  9. MICANITA  ROLLO  0,3 MM

    MICANITA ROLLO 0,3 MM

    Characteristics:

    - Flexible material based on mineral mica-flogopite quality

    - with small addition of silicon resin. - It works as a sliding surface for lining in Coreless INDUCTION FURNACES.

    - Sheets 2.000x1.000 mm, espesor 0,3 mm.

    Application:

    - Electric isolation material in CORELESS INDUCTION FURNACES.

    - Electric isolation element in CHANNEL FURNACE COIL´S.

    - As a join element in joints, coils etc.

    - In Aluminium transport ladles, to protect the isolation against the water originated.

    - To protect the isolation against the water originated during process.

    Learn More
  10. MICANITA ROLLO 0.4MM

    MICANITA ROLLO 0.4MM

    Characteristics:

    Flexible material based on mineral mica-flogopite quality

    - with small addition of silicon resin.

    - It works as a sliding surface for lining in Coreless INDUCTION FURNACES.

    - Sheets 2.000x1.000 mm, thickness 0,4 mm

    Application:

    - Electric isolation material in CORELESS INDUCTION FURNACES.

    - Electric isolation element in CHANNEL FURNACE COIL´S.

    - As a join element in joints, coils etc.

    - In Aluminium transport ladles, to protect the isolation against the water originated.

    - To protect the isolation against the water originated during process.

    Learn More

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction