Sale and Manufacture of Refractory Products
es | en

INSEPLAST - 80PV

CHECK IN AND CONSULT THE PRICE

Availability: In stock

Characteristics:


Chemically bonded plastic material based on tabular alumina and chromium oxide with high mechanical strength at any temperature.


Applications:


- Lining of crucibles and syphons in cupolas.


- Lining of foundry ladles.


- Iron and slag runners.


INSEPLAST - 80PV

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Embalaje sacos
  • Pallet masas
  • Etiqueta
CHECK IN AND CONSULT THE PRICE

Insertec Technical Data Sheet

Humidity xxx
Caracteristicas Chemically bonded plastic material based on tabular alumina and chromium oxide with high mechanical strength at any temperature
Application Lining of crucibles and syphons in cupolas. Lining of foundry ladles. Iron and slag runners
Temperature 1650ºc
Grain Size Distribution 0-5 mm
Tipo de Ligante Chemical - Ceramic
Chemical Analysis Al2O3 Aprox 42,2%; SiO2 Aprox 54,4%, Fe2O3 - 1,5%
Density 2.400 kg/m3
Installation Ram in 35 mm thick layers at maximun using pneumatic hammers with wedged head.
Storage In a humid place, 3 months maximun in unbroken package. Due to the phosphatic binders, its life decreases with high and low (< 5ºC) temperature storage.
Packing Paper sacs of 25 kg. 1200 kg.wrapped pallet.
Drying and Heating It does not demand a strict drying procedure. As a general rule: dry at 150ºC during 24 hours or more, depending on the installed amount. Then, heat up to working temperature at a rate of 50 ºC/hour. Check the specific curve in each particular case.