Sale and Manufacture of Refractory Products
es | en

INSEGUN 95 E

CHECK IN AND CONSULT THE PRICE

Availability: In stock

Characteristics:


- Aluminous refractory mass based on tabular alumina with a low iron oxide content.


Application:


- Its excellent workability allows various applications.


- Where a high refractoriness and an easy apply is required.


- Coil gruting of coreless induction furnaces


- Manteinance of burners


- Maintenace of furnaces for ferrous and non ferrous foundry.


- Lining of ducts which has to support high temperature and abrasion.

INSEGUN  95 E

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

CHECK IN AND CONSULT THE PRICE

Insertec Technical Data Sheet

Humidity XXX
Caracteristicas Aluminous refractory mass based on tabular alumina with a low iron oxide content.
Application Its excellent workability allows various applications such as where a high refractoriness and an easy apply is required: - Coil grouting of coreless induction furnaces. - Maintenance of burners. - Maintenance of furnaces for ferrous and non ferrous foundr
Temperature 1750ºC
Grain Size Distribution 0-3 mm
Tipo de Ligante Hydraulic.
Chemical Analysis Al2O3 > 95,0%; SiO2 < 0,1 %, Fe2O3 < 0,1 %
Density 2.900 kg/m3
Installation Mix with water up to a suitable consistency and install it with a trowel. It can also be installed with a gunning machine.
Storage In a dry place, 12 months.
Packing In 25 kg paper bags over shrunk-wrapped pallets.
Drying and Heating Follow specific instructions for each particular case. As a general rule: Hold for 24 hours before removing moulds. Dry at 100-150 ºC for 12 - 36 hours. Heat up to working temperature at a rate of 50ºC/h.

You may also be interested in the following product(s)

LADRILLO DENSO L.D.40/42%Al2O3 230x114x30 mm

LADRILLO DENSO L.D.40/42%Al2O3 230x114x30 mm