Sale and Manufacture of Refractory Products
es | en

INSETAB G

CHECK IN AND CONSULT THE PRICE

Availability: In stock

Characteristics:


- Conventional refractory castable. based on tabular alumina with a very low iron oxide content.


- Its grain size is slightly coarser than that of INSETAB – N.


Applications:


- Lining of channel furnaces.


- Pouring units. Inductory coils for reheating and heat treatment.


- Reactors in petrochemical and chemical industries.


- Carbon black installations.


- Heavily reducing atmosphere furnaces.


- Also, in other industries such as cement, ceramic, power generation, petrochemical, etc.

INSETAB G

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

CHECK IN AND CONSULT THE PRICE

Insertec Technical Data Sheet

Caracteristicas Conventional refractory castable based on tabular alumina with a very low iron oxide content.
Application Lining of channel furnaces. Pouring units. Inductory coils for reheating and heat treatment.
Temperature 1800ºC
Grain Size Distribution 0-6 mm
Tipo de Ligante Hydraulic.
Chemical Analysis Al2O3 -Aprox. 96,0% ; SiO2 -Aprox. 0,10% ; Fe2O3 -Aprox 0,10%
Density 2900 Kg/m3
Installation Cast-vibration with needle vibrators. Do not prepare more material than the quantity to be installed within 20 minutes.
Storage In a dry place, 12 months maximum.
Packing In 25 kg. paper sacks, over shrunk - wrapped pallet
Drying and Heating Follow specific drying and sintering instructions recommended for each particular case. As a general rule: Hold for 24 hours before removing mould. Dry at 100-150 ºC for 12 – 36 hours. Heat up to working temperature at 50ºC/h.
Water Required Casting and Vibrating 7 – 10 % (depending on mixing conditions: outside temperature, mixer type, etc).