www.insertec.biz
- With a virtual chat assistant to help you.
- You will always know where your order is.
- You will have your own customer page to review your purchases.
- Make suggestions based on purchases you made previously.
- Exclusive offers ; only for clients.
Cement Plants
INSERTEC designs and manufactures a wide range of products for the Cement Industry.
INSERTEC has a well qualified people team and with a trajectory of 30 years giving solutions and service to our customers.
INSERTEC has developed a precast shapes manufacturing methodology, giving a step forward in the refractory engineering in the most critical zones of the Cement Furnace.
Featured
-
CUARSIL IS6-2.5 FA
Características:
- Masa siliciosa seca, basada en cuarcita microcristalina de gran pureza.
- Enriquecida con sílice electrofundida y mezclada con óxido bórico (B203)-O o ácido bórico (H3BO3)- A como agente de sinterizado.
- También se suministra sin ligantes.
Aplicaciones:
- Revestimiento de hornos de inducción de crisol de frecuencia de red, media o alta para la fusión de fundición nodular o aleada, de alta temperatura de colada, acero moldeado aleado y metales no férricos pesados.
- En general, las que exijan unas mejores prestaciones frente al choque térmico que un producto de cuarcita habitual.
-
PANEL MICROPOROSO ISO AL 20 1100x150x20
- this microporous panel has the lowest thermal condutivity of the market. - High temperatur ultra-insulation panels - Standar dimensions : 1100x700x20 mm ADVENTAGE 1.- Insulation for energy efficiency 2.- Clean and safe for the environment, does not contain breathable particles. 3.- Insulation for energy savings. APPLICATONS: In short , in all applications where energy efficiency and thermal insulation converge. Where extreme temperatures (hot or cold) requiere job security. 3.- Aislamiento de hornos de fusión, rotativos, torres de mantenimiento.
-
CALCIUM SILICATE-ISOL 1000X610X25 mm
Description:
- Calcium silicate boards cover arange of extremely lightweight insulating boards with excellent insulating value.
- High mechanical strength and good heat resistance.
- The boards are designed for maximum service temperatures of 1000ºC.
Application:
Calcium silicate boards are designed for the application as back-up insulation of all refractory constructions:
- Dense firebrick, insulating firebrick, castables, plastic refratories etc.
-
BIDON 17 L.
Bidon 17 Lts. Blanco anónimo Superflit extra
-
SF 6 1.6 CF
Characteristics:
- Dry silica mass based on high purity microcrystalline quartzite.
- Mixed with a special sintering agent that gives it higher refractoriness.
- Bigger resistance against erosion, penetration and wetting of melting metal.
Application:
Lining of high, medium and low frequency coreless induction furnaces melting spheroidal iron, alloyed iron with high temperature casting, alloyed steel castings, and generally, any cast iron demanding better performance qualities than CUARSIL IS6 with Boron Oxide or Boric Acid.
-
REVESTIMIENTO INDUCTOR PRESS POUR
Revestimiento Inductor PRESS POUR 5 Tons. Precio válido Hasta 31.12.16
-
MANO OBRA LABORABLES-FESTIVOS
Mano de Obra Trabajo Exterior Mano de Obra día laborable 687 Mano de Obra día Festivo 874 Precio válido Hasta 31.12.16
-
PNEUMATIC VIBRATOR 3 ARMS 800-1200MM TIPO K60-180/A3 AR70
Foundries choose this system because: - Environmentally friendly, less dusting. - Safe and economic installation. - Optimum packing density. - Consistent installation. - long lining life. - Time saving. Available in 2 or 3 armed versions. For furnaces from 0.5 - 80 tonnes. Thecnical data: Tipo 60 6 bar. air 780 l/min. Vib./min 2200 Power N 1830
Insertec has a highly specialized team to offer you a customized service, contact us.
Contact our after sales assistance and we will solve all your doubts.
Contact