REFRACTORY materials

A self-flowing castable has been successfully installed as a backup lining in a 125t steel mill ladle.

INSERTEC RSI has developed a new castable with silicon carbide content (6%) to be applied in transport ladles, casting elements and others in iron foundry.

We have developed and installing a new range of products INSESTRONG / ALUSTRONG, based on ceramic fraction & metalic fraction.

INSESTRONG 80 is a ceramic-metallic material applied in the iron sector with very good results. Applications:Long campaign cupola, rotary furnace, melting and induction furnace, ladle covers and channels. INSESTRONG - Download the application report: ...

After almost 2 years of operation and 130,000 MT, the cladding has undergone minimal alterations. This result confirms that precast shapes furnace threshold elements are an excellent alternative to lining with concrete.

One of the ways to cast iron in a foundry is by using automatic casting units. In recent years we have worked on improving materials for this application, having developed the INSECOR 70 S PLUS and the INSECOR 77S PLUS. These doughs have been installed in CAP ovens from 4T to 25T with excellent results.

The events of recent months have had a major impact on the production forecasts and planning of foundries. The uncertainty of the market, of supply and of delivery times means that maintenance stops, times and budgets have to be made as flexible as possible: extended, reduced, brought forward, delayed, etc.

INSERTEC, have developed a complete range of CUARSIL IS7, with some improved performance thermomechanical that means, better resistance of the lining to the formation of cracks.

The elimination of water from the refractory material must be progressive and carried out at a controlled speed determined by the characteristics of the product, the quantity, the thickness and the thermal profile of the lining to be dried.

The main advice is periodic maintenance. They are the best prevention. With this in mind, there are three main points that will help us.

The adhered corundum layer is initially soft and can be easily removed, but in later stages the product is dense, hard and difficult to remove during cleaning and can cause mechanical damage to the lining during removal.

INSERTEC, Put at your disposal an engineering studies; Combination of Refractory castables and precast pieces to rehabilitate and optimize the performance of lining.

The soluble fibre blanket is manufactured using a unique spinning technology and is made from a mixture of calcium, silica and magnesium which gives the fibre the ability to withstand continuous applications under high temperature conditions of 1300ºC.

Refractory bricks have been used for the lining of reverberatory furnaces. For the installation of these bricks, a large amount of concrete is required, which then has to be dried and takes a long time to lay. As an alternative from INSERTEC, we propose the use of the so-called BIG-BLOCKS.

Nuestra filial está de celebración. ...

Currently the range of Insetag products (INSETAG 87C2 - INSETAG 90 XF) are being used in Europe, in countries such as Turkey and other countries of the African continent in very particular conditions. INSETAG 87 C2-INSERTEC Adverse conditions in terms of quality of scrap, loading systems manuals etc ...

MAPATCH 90, for transfer ladle lining, works as sacrifice material which adheres the slag material and remains of casting that could contaminate the metal and protecting the refractory of slags attack that can damage the lining having to repair the surface of the ladle. Main advantages of this mater ...