NOTICIAS

After almost 2 years of operation and 130,000 MT, the cladding has undergone minimal alterations. This result confirms that precast shapes furnace threshold elements are an excellent alternative to lining with concrete.

One of the ways to cast iron in a foundry is by using automatic casting units. In recent years we have worked on improving materials for this application, having developed the INSECOR 70 S PLUS and the INSECOR 77S PLUS. These doughs have been installed in CAP ovens from 4T to 25T with excellent results.

The events of recent months have had a major impact on the production forecasts and planning of foundries. The uncertainty of the market, of supply and of delivery times means that maintenance stops, times and budgets have to be made as flexible as possible: extended, reduced, brought forward, delayed, etc.

INSERTEC, have developed a complete range of CUARSIL IS7, with some improved performance thermomechanical that means, better resistance of the lining to the formation of cracks.

The elimination of water from the refractory material must be progressive and carried out at a controlled speed determined by the characteristics of the product, the quantity, the thickness and the thermal profile of the lining to be dried.

INSERTEC turns 40 this February. It was a day 2 of 1980 where the vision of Julio Astigarraga Urquiza was embodied in the constitution of INSERTEC, acronym for INGENIERÍA y SERVICIOS TÉCNICOS SA. In this adventure he was always accompanied by Miguel Astigarraga Urquiza, Miguel Urruticoechea Urquiza and José Luis Agirre Ormaza.

"The world is watching us. It's time to act. With this slogan, the COP25 climate summit started on Monday in Madrid. In his inaugural speech, its new president, Carolina Schmidt Zaldívar, stressed the importance of a real commitment of political institutions and the need for a faster, fairer and more inclusive climate transition.

The main advice is periodic maintenance. They are the best prevention. With this in mind, there are three main points that will help us.

The adhered corundum layer is initially soft and can be easily removed, but in later stages the product is dense, hard and difficult to remove during cleaning and can cause mechanical damage to the lining during removal.

The preindustrial prototype for Paval refining with a Refinal´s capacity of 500tpy has been started during the month of October, as it was expected in the project´s schedule.

in Turkey, where INSERTEC has supplied a 2000 kg/hr Fusora Tower and auxiliary equipment .

INSERTEC, Put at your disposal an engineering studies; Combination of Refractory castables and precast pieces to rehabilitate and optimize the performance of lining.

The soluble fibre blanket is manufactured using a unique spinning technology and is made from a mixture of calcium, silica and magnesium which gives the fibre the ability to withstand continuous applications under high temperature conditions of 1300ºC.

The IDEX® is designed to give maximum flexibility together with minimum fuel consumption and emissions. It is an indirectly fired rotary kiln for thermal delacquering / drying that removes volatile organic compounds (VOC), such as water coolants, paints, oils, ... from the surface of crushed aluminium materials.

Refractory bricks have been used for the lining of reverberatory furnaces. For the installation of these bricks, a large amount of concrete is required, which then has to be dried and takes a long time to lay. As an alternative from INSERTEC, we propose the use of the so-called BIG-BLOCKS.

Nuestra filial está de celebración. ...

Some of our customer in Casting Aluminium, taking advantage in summer holidays to setting up their Melting Towers. INSERTEC, Put at your disposal an engineering studies; Combination of Refractory castables and precast pieces to rehabilitate and optimize the performance of lining. SIFCA technology su ...

illet Casthouse Melting unit Aluminium Tilting Reverb Melter MELTING PRODUCTION RATES  Furnace capacity....................................................12 Ton Material to process - 70% Baled or loose clean Window frames & profiles,Occasionally painted or dirty scrap - 30% Primary Ingot b ...

During July and August 2015, INSERTEC has been undertaken more than 60 pojects of maintenance Refractory linings. The local market is still predominantly but we have had an increase of projects in the rest of Europe. To carry out these projects, e have counted with the support of a team of more than ...

Aluminium MELTOWER Furnace Continuous Melting furnace 5000 kg/hr on tower mode, for alloyed aluminium in high-pressure diecasting process. MELTOWER designed and manufactured in modular way, charging hood, preheating and melting chambers, over a structural support frame. The height is adjusted to tra ...