SF4 0.6 A

SF4 0.6 A CUARSIL IS4 0.6 AN

Characteristics:

- Dry silica mass based on high purity microcrystalline quartzite.

- Mixed with Boron Oxide (B₂0₃)-AN

Aplicación:

- CIF. Coreless induction furnaces.

- Lining of high, medium and low frecuency.

Inicia sesión o regístrate para descargar la ficha técnica

Insertec Technical Data Sheet

Humidity	It is guarenteed a maximum of 0.2% of moisture on fininshing the manufacturing process. See TDS
Caracteristicas	Dry silica mass based on high purity microcrystalline quartzite, mixed with either Boron Oxide .
Application	Lining of high, medium and low frequency coreless induction furnaces high temperature melting grey or nodular iron.
Temperature	Depends on binding percentage.between 1.400 and 1650ºC. See TDS.
Grain Size Distribution	0-4 mm
Tipo de Ligante	Oxido Bórico (B2O3) between 0,3 y 1,2% and IS4 AN.see attaced TDS
Chemical Analysis	Al2O3 - Max.0,9%, SiO2 - (98-99)%; Fe2O3 - Máx.0,4%
Density	>2.080 kg/m3
Installation	Dry hand ramming using specific vibration equipments for bottom and sidewalls.See attached TDS.
Storage	Pallets must be stored in a dry place. Maximum lifetime 12 months.
Packing	In 25 kg paper sack over shrunk-wrapped pallet. Total Pallet 1000 kg
Drying and Heating	Depending on furnace´s capacity, heat up to working temperature at rate of 100-180ºC/h