Sale and Manufacture of Refractory Products
es | en

Asistente

Asistente

Items 1 to 10 of 60 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
  1. BRICKS 40/42 AL 203=230X114X64

    BRICKS 40/42 AL 203=230X114X64

    Characterístics:

    - Piece made of aluminous material .

    Applications:

    - For layers of insulation coatings.

    - Anyone that needed a moderate refractoriness.

    Learn More
  2. BRICKS 40/42 AL 203=230X114X64

    BRICKS 40/42 AL 203=230X114X64

    Characterístics:

    - Piece made of aluminous material .

    Applications:

    - For layers of insulation coatings.

    - Anyone that needed a moderate refractoriness.

    Learn More
  3. BRICKS 40/42 AL 203=230X114X64

    BRICKS 40/42 AL 203=230X114X64

    Characterístics:

    - Piece made of aluminous material .

    Applications:

    - For layers of insulation coatings.

    - Anyone that needed a moderate refractoriness.

    Learn More
  4. BRICKS 40/42 AL 203=230X114X64

    BRICKS 40/42 AL 203=230X114X64

    Characterístics:

    - Piece made of aluminous material .

    Applications:

    - For layers of insulation coatings.

    - Anyone that needed a moderate refractoriness.

    Learn More
  5. BRICKS 40/42 AL 203=230X114X64

    BRICKS 40/42 AL 203=230X114X64

    Characterístics:

    - Piece made of aluminous material .

    Applications:

    - For layers of insulation coatings.

    - Anyone that needed a moderate refractoriness.

    Learn More
  6. LADRILLO DENSO L.D.80/85 % AL2O3

    LADRILLO DENSO L.D.80/85 % AL2O3

    Characteristics:

    - Shaped piece in alumina material with ceramic bounding

    Application:

    - For moderated insulation

    Learn More
  7. MICANITA ROLLO 0.4MM

    MICANITA ROLLO 0.4MM

    Characteristics:

    Flexible material based on mineral mica-flogopite quality

    - with small addition of silicon resin.

    - It works as a sliding surface for lining in Coreless INDUCTION FURNACES.

    - Sheets 2.000x1.000 mm, thickness 0,4 mm

    Application:

    - Electric isolation material in CORELESS INDUCTION FURNACES.

    - Electric isolation element in CHANNEL FURNACE COIL´S.

    - As a join element in joints, coils etc.

    - In Aluminium transport ladles, to protect the isolation against the water originated.

    - To protect the isolation against the water originated during process.

    Learn More
  8. CUARSIL IS4 0,8 AN

    CUARSIL IS4 0,8 AN

    Characterístics:

    - Dry silica mass based on high purity microcrystalline quartzite.

    - Mixed with either Boron Oxide (B203) -AN

    - It may also be delivered without any sintering agent.

    Applicatión:

    Lining of high, medium and low frequency coreless induction furnaces high temperature melting grey or nodular iron, heavy non-ferrous metals and steel casting.

    Learn More
  9. CUARSIL IS6  0.8 PAN

    CUARSIL IS6 0.8 PAN

    CHARACTERISTICS:

    Dry silica mass based on high purity microcrystalline quartzite, mixed with either Boron Oxide (B203) -AN as a sintering agent.

    It differs from CUARSIL IS4, because its aggregate composition and grain size distribution have been optimised.

    Therefore, a better material with higher density and lower porosity has been achieved.


    APPLICATION:

    - Lining of high, medium and low frequency coreless induction furnaces for nodular or alloyed melting with high temperature casting, and, in general, those linings that require better performance qualities than CUARSIL IS4 with Boron Oxide

    Learn More
  10. CUARSIL IS6  0.8 PAN-K

    CUARSIL IS6 0.8 PAN-K

    CHARACTERISTICS:

    Dry silica mass based on high purity microcrystalline quartzite, mixed with either Boron Oxide (B203) -AN as a sintering agent.

    It differs from CUARSIL IS4, because its aggregate composition and grain size distribution have been optimised.

    Therefore, a better material with higher density and lower porosity has been achieved.


    APPLICATION:

    - Lining of high, medium and low frequency coreless induction furnaces for nodular or alloyed melting with high temperature casting, and, in general, those linings that require better performance qualities than CUARSIL IS4 with Boron Oxide

    Learn More

Items 1 to 10 of 60 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction