Sale and Manufacture of Refractory Products
es | en

Coreless Induction Furnace

Items 1 to 10 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
  1. MICANITA ROLLO 0.4MM

    MICANITA ROLLO 0.4MM

    Characteristics:

    Flexible material based on mineral mica-flogopite quality

    - with small addition of silicon resin.

    - It works as a sliding surface for lining in Coreless INDUCTION FURNACES.

    - Sheets 2.000x1.000 mm, thickness 0,4 mm

    Application:

    - Electric isolation material in CORELESS INDUCTION FURNACES.

    - Electric isolation element in CHANNEL FURNACE COIL´S.

    - As a join element in joints, coils etc.

    - In Aluminium transport ladles, to protect the isolation against the water originated.

    - To protect the isolation against the water originated during process.

    Learn More
  2. MICANITA ROLLO 0.5 MM

    MICANITA ROLLO 0.5 MM

    Characreristics:

    - Flexible material based on mineral mica.

    - Flogopite qualit.

    - With small adddition of silicon resin.

    - Due to its special design, it works as a sliding surface for lining in CIF.

    Application:

    - Electric insolation material in coreless induction furnaces.

    - Electric insolation element in channel furnace coil´s .

    - As a joint element in joints, coils, etc. In aluminium trasport ladles to protect the insolation against the water oiginated during the drying process.

    - Many other applications.

    Learn More
  3. CUARSIL IS4 0.6 AN

    CUARSIL IS4 0.6 AN

    Characteristics: 

    - Dry silica mass based on high purity microcrystalline quartzite.

    - Mixed with Boron Oxide (B203)-AN 

    Aplicación:

    - CIF. Coreless induction furnaces.

    - Lining of high, medium and low frecuency.

    Learn More
  4. CUARSIL IS4 1 AN

    CUARSIL IS4 1 AN

    Characteristics:

     - Dry silica mass based on  high puriity microcrystalline quartzite mixed with Boron Oxide (B2O3) - AN as sintering agent.

    - It may also be delivered without any sintering agent.


    Application:

    - Lining of high medium and low frequency coreless induction furnaces melting grey or nodular iron, non

    - Ferrous metals and steel casting.

    Learn More
  5. CUARSIL IS4 0,8 AN

    CUARSIL IS4 0,8 AN

    Characterístics:

    - Dry silica mass based on high purity microcrystalline quartzite.

    - Mixed with either Boron Oxide (B203) -AN

    - It may also be delivered without any sintering agent.

    Applicatión:

    Lining of high, medium and low frequency coreless induction furnaces high temperature melting grey or nodular iron, heavy non-ferrous metals and steel casting.

    Learn More
  6. CUARSIL IS6  0.8 PAN

    CUARSIL IS6 0.8 PAN

    CHARACTERISTICS:

    Dry silica mass based on high purity microcrystalline quartzite, mixed with either Boron Oxide (B203) -AN as a sintering agent.

    It differs from CUARSIL IS4, because its aggregate composition and grain size distribution have been optimised.

    Therefore, a better material with higher density and lower porosity has been achieved.


    APPLICATION:

    - Lining of high, medium and low frequency coreless induction furnaces for nodular or alloyed melting with high temperature casting, and, in general, those linings that require better performance qualities than CUARSIL IS4 with Boron Oxide

    Learn More
  7. CUARSIL IS6  0.6 PAN

    CUARSIL IS6 0.6 PAN

    CHARACTERISTICS:

    Dry silica mass based on high purity microcrystalline quartzite, mixed with either Boron Oxide (B203) -AN as a sintering agent.

    It differs from CUARSIL IS4, because its aggregate composition and grain size distribution have been optimised.

    Therefore, a better material with higher density and lower porosity has been achieved.


    APPLICATION:

    - Lining of high, medium and low frequency coreless induction furnaces for nodular or alloyed melting with high temperature casting, and, in general, those linings that require better performance qualities than CUARSIL IS4 with Boron Oxide

    Learn More
  8. CUARSIL IS6  0.6 PAN

    CUARSIL IS6 0.6 PAN

    CHARACTERISTICS:

    Dry silica mass based on high purity microcrystalline quartzite, mixed with either Boron Oxide (B203) -AN as a sintering agent.

    It differs from CUARSIL IS4, because its aggregate composition and grain size distribution have been optimised.

    Therefore, a better material with higher density and lower porosity has been achieved.


    APPLICATION:

    - Lining of high, medium and low frequency coreless induction furnaces for nodular or alloyed melting with high temperature casting, and, in general, those linings that require better performance qualities than CUARSIL IS4 with Boron Oxide

    Learn More
  9. CUARSIL IS6 1.6 CF

    CUARSIL IS6 1.6 CF

    Characteristics:

    - Dry silica mass based on high purity microcrystalline quartzite.

    - Mixed with a special sintering agent that gives it higher refractoriness.

    - Bigger resistance against erosion, penetration and wetting of melting metal.

     

    Application:

    Lining of high, medium and low frequency coreless induction furnaces melting spheroidal iron, alloyed iron with high temperature casting, alloyed steel castings, and generally, any cast iron demanding better performance qualities than CUARSIL IS6 with Boron Oxide or Boric Acid.

    Learn More
  10. CUARSIL IS4 1.2 AN

    CUARSIL IS4 1.2 AN

    Characteristics:

    - Dry silica mass based on high purity microcrystalline quartzite.

    - Mixed with either Boron Oxide (B203) -AN  as a sintering agent.

    - It may also be delivered without any sintering agent.

    Application:

    Lining of high, medium and low frequency coreless induction furnaces high temperature melting grey or nodular iron. heavy non-ferrous metals and steel casting.

    Learn More

Items 1 to 10 of 30 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction